| nada qspace |
08-02-2017 05:16 PM |
Course: Fundamentals of Corrosion & Corrosion Control
http://www13.0zz0.com/2017/08/02/15/168271054.png
íÞÏã ãÑßÒ
Q space training and development
ÏæÑÇÊ ÇáÌíæáæÌíÇ æÇáÈÊÑæá æÇáãÚÇÏä
1. Course: Fundaments of Chemical Engineering
2. Course: Fundamentals of Process equipments (selection, sizing, operation)
3. Course: Fundamentals of Ethylene & Propylene, Polypropylene and Polyethylene Industry
4. Course: Fundamentals of Heat Transfer Equipment Operation, Startup and Commissioning
5. Course: Fundamentals of Ethylene & Propylene, Polypropylene and Polyethylene Industry
6. Course: Fundamentals of Equipment in Oil & Gas Industry
7. Course: Fundamentals of Corrosion & Corrosion Control
8. Course: Fundamental of catalyst in oil & gas Industry
9. Course: Flare System, Operations and Design
10.Course: Fire Protection Systems
11. Course: Emergency and Process Shut-down (ESD and PSD)
12. Course: Distillation operation, control and troubleshooting
13. Course: Distillation operation, control and troubleshooting
14. Course: Desalination (RO, MSF Units, Vapor Compression)
15. Course: DCS Simulator for Process Panel Operators
16. Course: Crude Oil Testing & Equipment
17. Course: Crude oil dehydration and desalting
18. Course: Crude Oil Classification, Assays, Products Specification and Testing
19. Course: Crude Oil & Petroleum Products Analysis & Quality Control
20. Course: Corrosion & Corrosion Control Fundamentals in Oil & Gas Field
21. Course: Cooling water and Fire water Protection Systems
22. Course: Continuous catalyst regeneration (CCR)
23. Course: Computer Aided Process Engineering and Simulation
24. Course: Choice and Evaluation of Chemicals for Oil & Gas Treatment
25. Course: Chemical treatment for oil and gas field
26. Course: Chemical laboratory in Petroleum Industry
íãßäßã ÇáÊæÇÕá æãÚÑÝÉ ÌãíÚ ÇáãÚáæãÇÊ Úä ÇáÏæÑÇÊ ãä ÎáÇá :
Training Coordinator
Email: nada@qspacetraining.com
Web: www.qspacetraining.com
Mob/Whatsapp /Viber:
00201010501024
Blogger
Linkedin
Twitter
ÑÇÈØ ÇáãÕÏÑ: https://hrdiscussion.com/newthread.php?do=newthread&f=2
|
