العودة   أكاديمية التدريب الاحترافي > أكاديمية التدريب الاحترافي للتسويق والإعلانات للبرامج والمراكز التدريبية > أكاديمية الإعلان للبرامج التدريبية للمراكز والمعاهد التدريبية
 

إضافة رد

 
أدوات الموضوع انواع عرض الموضوع
  #1  
قديم 07-25-2020, 07:18 AM
المجد غير متواجد حالياً
المجد
الأعضاء
 

افتراضي دورة ادارة الجوده الشامله و الايزو 9001 في التعليم العالي تعقد في اسبانيا ولندن ودبي




يسر مركز المجد للجودة وتطوير الموارد البشرية بدعوتكم للمشاركة بدورة :
ادارة الجوده الشامله و الايزو 9001 في التعليم العالي


باعتماد من جامعة غرب امريكيا و كليات هارفرد و كامبرج و مانشستر الدوليات للتدريب

تاريخ ومكان انعقاد الدورات التدريبية :

تعقد الدورات بشكل اسبوعي وعلى مدار العام في كل من الاردن و اسطنبول و ماليزيا و دبي والقاهرة وشرم الشيخ و بيروت و المغرب و تونس و لندن والمانيا واندونيسيا و مدريد و برشلونة روما و فينا ولشبونة و فارنا و ستوكهولم و سنغافورا و هونج كونج و سيؤول و كندا و باريس و اثينا و اوسلو و بوخارست و يوغوسلافيا و بكين و تايلند و مومباي و البرازيل.






ويمكنكم مراسلتنا عبر معلومات الاتصال التالية :
الموقع الالكتروني : www.almjd-hr.com
البريد الالكتروني : [email protected]
هاتف واتس اب و فايبر: 00962795447255





وفيما يلي بقية دورات الجودة:
-دورة ادارة الازمة الامنية طبقا لنظام الجودة العالمي
-دورة ادارة الجوده الشامله
-دورة ادارة الجوده الشامله و الايزو 9001 في التعليم العالي
-دورة ادارة الجوده في المختبرات
-دورة الكايزن
-دورة (6) سجما
-دورة ضبط النوعيه
-دورة تأكيد الجوده
-دورة ادارة الجودة الشامله والايزو 9001 حسب احدث الاصدارات
-دورة قياس ضابط الجودة
-دورة الادارة بالجودة الشاملة كمدخل للتنافسية والتميز
-دورة نظم التحكم في وثائق الجودة
-دورة اعداد كبير مراجعي الايزو 2008/9001
-دورة المراجعة الداخلية لنظم الجودة الايزو
-دورة بناء وتقييم القدرات المؤسسية للمؤسسات في ظل الجودة الشاملة
-دورة الجودة الشاملة ونظ تحليل وترشيد قياس الاداء
-دورة الارتقاء الاداري بعمليات الانتاج الوسيط ووضع مواصفات المنتج النهائي
-دورة اسس الجودة واصول واخلاقيات المهنية
-دورة معايير الامن والسلامة البيلوجية وتوكيد الجودة في المعامل والمختبرات
-دورة التخطيط الاستراتيجي في تطوير المنتج وتحقيق الجودة الشاملة
-دورة العلاقات العامة وفقا لمعايير الجودة الشاملة والادارة الالكترونية المعاصرة
-دورة الاخطاء الشائعة لتطبيقات الجودة
-دورة التميزفي الاداء في خلال مدخل 6 سيجما
-دورة التحليل الاحصائي لنظم الجودة
-دورة تطبيقات مفاهيم الجودة الشاملة في الادارة المحلية والبلدية
-دورة تطبيق الجودة في التعليم الاكاديمي
-دورة مختبر تحليل البيانات
-دورة العوامل الثمانية لانشاء نظام ادارة الجودة المستدامة
-دورة برنامج التدقيق الداخلي للاختبار ومختبرات المعايرة ايزو 2005/17025
-دورة الرقابة على الجودة في مشروعات التشييد
-دورة توعية وتطبيق لنظام الجودة في المختبرات (ISO 27025)
-دورة تاهيل مدير مراقبة جودة
-دورة الجودة والبيئة ونظم الامن الصناعي بالمنشات الصناعية
-دورة تخطيط وتنفيذ المراجعة الداخلية للجودة طبقا للمواصفة العالمية
-دورة ادارة العمليات في ظل مفهوم وتحسين الجودة
-دورة تخطيط وجدولة حلقات ضبط الجودة
-دورة الاساليب الحديثة لتبسيط اجراءات نظم العمل في ظل منهج الجودة
-دورة الجودة الشاملة في مختبرات التحاليل الطبية والكيميائية
-دورة0 تطوير مهارات أخصائي تأكيد إدارة الجودة الايزو9001/الايزو1013
-دورة مستشار الجودة الإدارية المعتمد – الايزو 10019
-دورة الجودة في خدمة العملاء – ايزو 10002
-دورة نظام إدارة الجودة الايزو 2008/9001
-دورة تطوير مهارات أخصائي الجودة التعليمية ايزو 29990:2010
-البرنامج التدريبي 6 سيجما الحزام الاصفر والاخضر
-دورة إعداد مراجعى الجودة الداخليين
-دورة تطبيق مواصفة استشاري الجودة الادارية الايزو9001/الايزو10019
-دورة تنمية مهارات الجودة الإدارية ايزو 2015:9001 ISO
-دورة سلامة الغذاء – نظام ادارة الجودة آيزو 22000
-دورة دليل نظام ادارة الجودة والتدقيق الداخلي 9001
-دورة التدقيق الداخلي لنظام الجودة الآيزو9001:2015 (المواصفة الجديدة )
-دورة الاستراتيجية الشاملة لإدارة الجودة
-دورة إدارة الجودة الشاملة - صندوق الأدوات للتحسين المستمر
-دورة سياق العمل لإدارة الجودة الشاملة
-دورة تطوير ومقدمة واستدامة إدارة الجودة الشاملة
-دورة إدارة الجودة الشاملة - مقدمة تنظيمية متقدمة
-دورة نظم إدارة الجودة المتقدمة والأدوات والتقنيات
مدير الجودة المعتمد من ASQ



يمكنكم الاطلاع على بقية الدورات التدريبية بمختلف المجالات عند زيارة الموقع الالكتروني :
www.almjd-hr.com






رد مع اقتباس
قديم 09-28-2021, 04:55 PM   رقم المشاركة : [2]
FrankJScott
الأعضاء
 

معلومات اضافية
الجنس :
الدولة :
المزاج :

My MMS
إرسال رسالة عبر ICQ إلى FrankJScott إرسال رسالة عبر AIM إلى FrankJScott إرسال رسالة عبر Yahoo إلى FrankJScott إرسال رسالة عبر Skype إلى FrankJScott
افتراضي Luar Biasa Judi Poker Forum

Menanggapi orang bertanya tentang idn poker qq, daftar poker idn deposit pulsa tanpa potongan, judi online24jam deposit, Saya sangat menyarankan ini membantu agen idn poker toko or online poker sites usa, judi online24jam deposit, link judi poker idn, poker rules card, idn poker online 77, di atas ini terbaik judi online domain dan jangan lupa ini pokerand grading, situs idn poker bonus new member 100, poker online idn deposit pulsa tanpa potongan, online poker with friends real money, cara daftar poker online idnplay, bersama semua ini peringkat teratas situs idn poker halaman which is also great. Also have a look at this luar biasa poker toko dan jangan lupa ini judi online menurut hukum, poker face lyrics lucki, agen idn poker online, film judi poker terbaik, poker online idn terpercaya, dan juga ini luar biasa judi poker online link di atas ini online poker games to play with friends, online poker tournaments uk, judi online24jam terpercaya 2021 deposit dana, judi online malaysia ditangkap, login idn poker asia, bersama semua ini terbaik poker online halaman yang juga layak untuk dilihat. Saya juga menyarankan ini terbaik judi poker online toko bersama semua ini situs poker online idn terpercaya, poker idn play apk, judi poker idnplay, situs judi poker idn play, pokerand, bersama semua ini lihat situs idn poker url bersama semua ini online poker tournaments india, judi bola online malaysia, judi poker online, judi online24jam deposit pulsa xl, judi poker idn deposit pakai pulsa 5000, dan juga ini hebat idn poker domain yang juga hebat. Akhirnya, lihat ini keren judi poker online toko and poker, idn poker online indonesia, poker idn terbaru 2020, untuk memastikan ekstra. Lihat lainnya Luar Biasa Judi Online Domain 0_746c2


FrankJScott غير متواجد حالياً   رد مع اقتباس
قديم 10-12-2021, 05:13 PM   رقم المشاركة : [3]
FrankJScott
الأعضاء
 

معلومات اضافية
الجنس :
الدولة :
المزاج :

My MMS
إرسال رسالة عبر ICQ إلى FrankJScott إرسال رسالة عبر AIM إلى FrankJScott إرسال رسالة عبر Yahoo إلى FrankJScott إرسال رسالة عبر Skype إلى FrankJScott
افتراضي Excellent Affordable Ways To End Your Snoring Advice

In reply to the person talking about sleepright nasal breathe aid australia, do breathe right strips work for deviated septum, how to cure nasal snoring, mute nasal dilator instructions, I highly suggest this recommended types of anti snoring devices advice on top of is it better to breathe through your nose or mouth when exercising, how to apply nose strip, nasal breathing difficult, breathe right nasal strips review snoring, look at this awesome snoring aids details and don't forget do nasal strips help sleep apnea, how to use rivaj nose strips, do nasal strips work for deviated septum, how do you put on nasal strips, try this best how to stop snoring with these remedies advice for how to put in nose ring with ball, nasal breathing benefits pubmed, nasal strips for snoring india, how to nasal breathe while running, Also don't forget this new stop snoring devices tips and don't forget how to make homemade nasal strips, how to use nose strips in hindi, what size nasal dilator do i need, nasal strips for snoring during pregnancy, look at this recommended nasal spray side effects info for how to clear your nose so you can breathe, how to fix broken nose piece on glasses, why do runners wear nose strips, alongside all this useful snoring causes and treatment advice not to mention how to breathe through your nose when running, which breathe right strips work the best, how to train yourself to become a nose breather, how to use nose pore strips charcoal watsons, look at this best how to stop snoring info and don't forget nasal strips amazon.ca, how to do nasal intubation, how to fix nose breathing, how to use biore charcoal nose strips, try this high rated cures for nasal congestion advice for how to become nose breather, mute nasal dilator instructions, how to recover after nose surgery, breathe right extra strength large, Also don't forget this high rated stop snoring with quitting bad habits blog not to mention how often to use charcoal nose strips, breathe right nasal strips small/medium, how to apply biore charcoal nose strips, can nasal spray cause breathing problems, look at this cool stop snoring at night and keep your loved ones happy site for can breathing strips help with sleep apnea, breathe right nasal strips reviews, how to use mute nasal dilator, See More Best Realbookie.Com.Au Review Info 6afd99f


FrankJScott غير متواجد حالياً   رد مع اقتباس
قديم 10-13-2021, 06:33 PM   رقم المشاركة : [4]
FrankJScott
الأعضاء
 

معلومات اضافية
الجنس :
الدولة :
المزاج :

My MMS
إرسال رسالة عبر ICQ إلى FrankJScott إرسال رسالة عبر AIM إلى FrankJScott إرسال رسالة عبر Yahoo إلى FrankJScott إرسال رسالة عبر Skype إلى FrankJScott
افتراضي ISO Standardization Is A Key To The Growth Of Your Business

Part 2-8 - Electrical Medical Equipment: Specific Safety Requirements And Vital Performance In X-Ray Therapy Equipment Operating Within The Voltage Range From 10 Kv Up To One Mv. En 60601-2-8:2015
For many reasons, companies might not adhere to certain norms or regulations. One reason is the fact that standards are constantly changing. EN 60601-2-8.2015 has been regarded as among the most significant documents that medical equipment companies must follow. It lays out the fundamental safety and performance standards for medical X-ray equipment that is therapeutic, which has nominal Xray tube voltages of 10 kV and 1 MV when connected to an alternating current supply mains. It contains the requirements of accuracy and reproducibility in performance, which are directly related to radiation quality. The second edition replaces the IEC 60601-2-8's first edition and replaces it with a new version. This edition constitutes an update to the technical specifications that bring this standard in line with the third edition of IEC 60601-1 as well as its other standards. If your company operates in the above-mentioned field, we recommend that you visit this site. See the most popular cen catalog standards en-10142-1990-a1-1995 blog.

Innovation Management - Foundations And The Vocabulary (Iso 56000, 2020) EN ISO 56000:2021
Explanatory documents can be created to meet technical standards, such as describing information security. This is in order to avoid misperceptions of the term. EN ISO 56000: 2021 is one such example. This document outlines the fundamental concepts and terminology for managing innovation and its systematic implementation. It can be used for:A) Companies that have implemented an innovation management program or conducting assessment of their innovation management.b. Organizations that need help in directing innovation activitiesc. customers, users, and any other relevant interested individuals (e.g. suppliers, partners as well as funding institutions university, investors and public authorities that want to have confidence in the organization's innovation capabilities.D. Organisations and other interested parties who want to enhance communication by establishing an understanding of the vocabulary used for innovation managemente) the providers of training evaluation of, or consultancy for, innovation management and other management systems;F. Innovation management standards and standards related to them1.2 This document is meant to be used in conjunction with:b. All forms and kinds of innovations, e.g. From incremental to radical, model, product, process, or method.C. All types of approaches including. c) All kinds of methods, e.g., internal and external innovation, market-, design- and technology-driven innovations.This document defines the terms and definitions that are applicable to all ISO/TC 279.-developed standards for innovation management and management systems.We recommend you read this document in depth. You may also want to compare them with your technological base to make sure you have the correct document to help you advertise your company internationally. Check out the top sist catalog standards sist-en-17210-2021 information.

The Characterisation And Determination Of Bulk Materials And Crystalline Silica Content. Part 1. Information About The General Aspects And Choices Of Test Methods EN 17289-1:2020
The diversity of the materials used in production can make it difficult to regulate both locally as well as globally. To ease the entry of businesses and organizations to new markets, international standards are being developed among them EN 17289-1:2020.This document outlines the criteria and the test methods to determine the size of the size-weighted fine portion (SWFF) as well as the size-weighted fine fraction of crystalline silica (SWFFCS) in bulk materials.This document gives also guidance for how to prepare the sample as well as determination of crystallized silica through the X-ray powder diffractometry (XRD) and Fourier Transform Infrared Spectroscopy (FT-IR).EN 1789-2 describes a procedure for calculating size-weighted fine percentage from a measured particles size distribution. However, it assumes that the size distributions of the crystalline particles are similar to those found in bulk material. EN 1789-3 describes a fluid sedimentation method for determining the size-weighted fine fraction of crystallized silica. Both methods are based upon several limitations and assumptions that are outlined in EN 17289-2 and EN 1789-3 and EN 17289-3, respectively. The EN 17289-3 method is also applicable to other constituents that are not CS when it is validated.This document applies to bulk materials that have been thoroughly researched and validated for the determination of the size weighted fine fraction or the crystalline silica.Your company's technological documentation base will be greatly aided when your business comes into contact with the information in this description. The link to our website provides more detail. See the most popular iso catalog standards iso-iec-20933-2019 blog.

Mechanical Products - Methodology To Reduction Of Environmental Impacts In Product Design And Development EN 16524:2020
As new technologies emerge and air pollution becomes more reported, environmental and safety concerns are constantly evolving. One document that offers a solution to this problem is EN 16524: 2020.This document outlines how to reduce the impact on the environment of product design and development. It is designed for mechanical products according to 3.1.This methodology is particularly well for redesigning an existing product; it is also a viable option to design any new product provided that the appropriate assumptions about a (virtual) reference product are taken. This approach is for companies who have decided to adopt an ecodesign strategy to maximize environmental impacts throughout the product's life cycle. It also addresses other aspects of the product, including functionality, price, and the quality.It also meets certain requirements of ISO 14001 2015 regarding the integration environmental aspects in product design. This document is aimed at people directly involved with the design and development mechanical products. It is also aimed at managers and decision-makers who are responsible for corporate policies and decision-making. The proposed method is designed to help companies start ecodesign initiatives as part of the continuous improvement and training approach.This document provides a template for companies to utilize in their communications regarding the environment. The document is not designed nor suitable to compare the products (even similar) from different suppliers. This document is not designed or suitable for product certification.This is a crucial document in the 21st century. That is why you should investigate the possibility of obtaining it and how you can incorporate it into your business activities. Check out the top sist catalog standards sist-en-iso-11363-1-2010-ac-2012 review.

Health Informatics, Device Interoperability. Part. 20701; Point-Of–care Medical Device Communications. Architecture For Exchange Of Medical Instruments That Is Service-Oriented. Protocol Binding (Iso/Ieee 11073–20701 2020). EN ISO 11073-20701:2020
These technologies are not only used in areas that fall within the scope of this class, but they are also used in the medical field. To facilitate the implementation of medical devices, it is difficult and requires the reorganization of current technology. International documents were created, such as EN ISO 11073-20701 2020.
This standard is an architecture for medical devices that is service-oriented and Communication Protocol Specification distributed systems of Point-of-Care(PoC), medical devices and medical IT systems that have to exchange information and control PoC connected medical devices. It describes the functional components and their communication relationships, as well as how they are connected to protocols specifications.This document is highly specialized and has been narrowly profiled. We suggest to learn more about its technical parameters and consult professionals who are knowledgeable about the international selection of documents. Have a look at the best iso catalog standards iso-13734-1998 information.



FrankJScott غير متواجد حالياً   رد مع اقتباس
قديم 10-13-2021, 07:16 PM   رقم المشاركة : [5]
FrankJScott
الأعضاء
 

معلومات اضافية
الجنس :
الدولة :
المزاج :

My MMS
إرسال رسالة عبر ICQ إلى FrankJScott إرسال رسالة عبر AIM إلى FrankJScott إرسال رسالة عبر Yahoo إلى FrankJScott إرسال رسالة عبر Skype إلى FrankJScott
افتراضي ISO Standardization Is Crucial To The Growth Of Businesses

Part 2-11 Part 2-11: Safety And Performance Requirements For Electrical Equipment Used In Medical Care En 60601-2-11:2015
Sometimes, medical equipment could be utilized to treat. However, it could be dangerous and have negative consequences. To reduce the risk of adverse effects medical equipment must be utilized. EN 60601-2-11.2015 is a reference to the situation. This document focuses on the safety requirements for gamma radiation therapy equipment. This particular standard, which is part of the 60601 Series, sets out the specifications that must be met by the manufacturer when designing and constructing gamma-beam therapy equipment. It specifies tolerance limits that interlocks must not exceed in order to stop, interrupt and terminate irradiation. Each rule specifies the type of tests that are done by the company and the site tests. Visit this link to learn more about our requirements for manufacturers whose companies are connected with gamma-beam therapy equipment. Check out the most popular sist catalog standards sist-iso-1340-1998 info.

Information Technology Security TechniquesCode Of Practice To Establish Information Security Controls Built On Iso/Iec 27002, For Cloud Services Iso/Iec 27017:2015
Information security issues become more important in the modern world. This issue is regulated by ISO / IEC 27017:2015.ISO/IEC 27017:2015 provides guidelines for the security of information that are applicable to the supply and use of cloud services. It provides: - additional implementation guidance for relevant controls specified in ISO/IEC 27002; - additional controls that include implementation guidance specific to cloud services. This Recommendation - International Standard offers guidelines and controls for cloud service providers and cloud service customers.With the variety of methods available for rapid information transfer in the present, we suggest that each one be explained in detail. Click here and then read the entire technical details. Have a look at the top clc catalog standards en-45510-4-8-1999 blog.

Characterization Of Bulk Material - Determination Of A Size-Weighted Fine Fraction, Crystalline Silica And The Content Of Crystalline Silicon - Part I General Information And The Selection Of Testing Methods EN 17289-1:2020
Regulators face significant challenges due to the variability in the manufacturing materials. International standards have been developed to ease companies and organisations in gaining access to new markets. One of them is EN 17289-1: 2020.This document provides information about the testing requirements and methods that can be employed to determine the dimensions of the fine fraction of crystal silica (SWFFCS), in bulk materials.This document includes guidance on preparation and determination by Fourier Transform Infrared Spectroscopy and X-ray Pulsed Diffractometry.EN 17289-2 describes a method for calculating the size-weighted small fraction by measuring the particle size distribution. It is based on the assumption that the size distribution of the silicon crystals is equal to the rest of the bulk material. EN 17289-3 specifies a method employing a method of liquid sedimentation to calculate the size-weighted fine percentage of crystalline silica. Both methods have limits and assumptions. These limitations are described in EN 17289-2and EN 17289-3. If properly validated and validated, the EN 17289-3 method may also apply to different constituents.This document is suitable to evaluate bulk crystalline silica materials, as long as it has been thoroughly researched and validated to allow for the analysis of size-weighted fine particles and crystal silica.If your field of activity involves the materials mentioned in this document's description, it's inclusion in the technical documentation base of your company will assist in increasing production. The link to our site will provide more details. Check out the recommended iso catalog tc iso-tc-34-sc-16-wg-9 info.

Woodworking Machines - Safety Part 10: Building Site Saws (Contractor Saws) (Iso 19085-10:2018, Which Includes Corrected Version 2019-12) EN ISO 19085-10:2019/A11:2020
Certain standards might have modifications due to technological advancements, however the original design of the standard in question isn't affected. EN ISO 19085-10 is a prime illustration of such a document.2020-07-20 CF: 2020-07-20 CF: 2020-07-20 CP: With the C132/2020, taken 202007-08, CEN Technical Board endorsed the revised Annex ZA. This was in accordance to the European Amendment, EN ISO 19085-10:2019. European amendment is in process of being published.If, as you read this document, you have a certain number of questions, you can always get in touch with the iTech team to discuss the information that you are interested in. Check out the most popular clc catalog tc clc-tc-64-wg-ahg blog.

Health Informatics - Requirements For International Machine-Readable Codes For Medicinal Package Identifiers ISO/TS 16791:2014 NEW version ISO/TS 16791:2020
The more new technologies emerge on the planet, the more regulations governing their use and minimising risks are created. EN ISO/ IEEE 11073-10201: 2020 is one example of such documents that can be easily updated through the use of innovative technology.This document provides guidelines for identifying and labelling medical products from the moment that they are made to be disposable. This document outlines best practices in AIDC barcoding solutions. The specifications for coding interoperability for other AIDC technologies are also considered by users, e.g. Radio Frequency IdentificationWe strongly suggest that you purchase this updated version if you've used this guideline, and continue to work within the same field of work. See the recommended etsi catalog standards etsi-ts-136-579-2-v14.5.0-2020-01 review.



FrankJScott غير متواجد حالياً   رد مع اقتباس
إضافة رد

أدوات الموضوع
انواع عرض الموضوع

ضوابط المشاركة
لا تستطيع إضافة مواضيع جديدة
لا تستطيع الرد على المواضيع
لا تستطيع إرفاق ملفات
لا تستطيع تعديل مشاركاتك

كود [IMG]متاحة
كود HTML معطلة



Free counters!